OMRON CP1E-N14DT-A Manual CP1E-N14DT-A REFERENCE MANUAL

Specifications: 2 × RS-232C ports, protocol macro function.8 pts, 1 A, 120 VAC.Specifications: Optical cable(H-PCF cable).Unit type: CS1 Special analog I/O Units.
Product name: Analog Output Units.
Specifications: I/O points, 8 outputs;
Signal range selection,
Set separately for each input;
Signal range, 4 to 20 mA;
Resolution, 1/4000 ;
Conversion speed, 1 s/point CP1E-N14DT-A REFERENCE MANUAL CP1E-N14DT-A
Externa connection, Removable erminal block.
Current consumption: 5V, 0.13A; 26V, 0.25A.
Standards: UC1, N, CE.
For Various Analog I/Os.
Analog Input Units for converting,
analog input signals into binary data.
Analog Output Units for converting ,
binary data into analog output signals. Name: Three-tier Screw Terminal Block CP1E-N14DT-A REFERENCE MANUAL.
Specifications: Outputs; 16 outputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-N14DT-A REFERENCE MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. 2 thermocouple inputsModel: CPM2C-PA201. Input: 100 to 240 V AC.Output: 24 V DC/600 mA.Protector for CPU Rack IOC or Expansion CPU Rack IOIF connector CV500-COV03Unit type: CJ1 CPU Bus Units.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No. of axes: 4 axes.
No. of unit numbers alloccated: 1 CP1E-N14DT-A Manual.
Current consumption : 5V, 0.46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control CP1E-N14DT-A Manual.
A wide range of position control,
functions are available with,
this position control unit.