OMRON CP1E-E60SDR-A Manual CP1E-E60SDR-A REFERENCE MANUAL

Model: C200HW-COM02-V1.
Specifications: One RS-232C port.NO. OF I/O SLOTS: 4 SLOTSNO. OF I/O SLOTS: 6 SLOTSName: e-CON Connectors.
Specifications: Inputs; 32 inputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CP1E-E60SDR-A REFERENCE MANUAL.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CP1E-E60SDR-A
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CP1E-E60SDR-A REFERENCE MANUAL. C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA004(3G2A5-DA004).
Output: 2 pts.
Specification: -10~+10V.Model : C500-PS223-E.
100 to 120 VAC or 200 to 240 VAC (selectable).
Output ratings: 12 A, 5 VDC.Name: DeviceNet Master Module.
Model: C200HW-DRM21-V1.
Baud rate: 500, 250, or 125 kbps (selectable)

DeviceNet Master Unit
The DeviceNet Master Unit Is a Multi-vendor Bus Conforming to the DeviceNet CP1E-E60SDR-A REFERENCE MANUAL. Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps.
Common Type: Independent.C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC222-EModel: C500-BC052(3G2A5-BC052).
5 slots(5 linkable slots).
Name: Repeater Unit.
Specifications: A sub-trunk line can be,
connected downstream,
(for trunk-branch line configuration),
or further branching is enabled downstream,
(for configurations with no wiring restrictions),
in the same way as for a Master Unit.
A Repeater Unit can be used to branch,
the trunk line and increase the,
number of connected Units,
as well as to extend the length of the,
communications line.
Standards: CE, U, U1, L, N.
Simple and Intelligent Bit Slaves,
with Industry-standard e-CON connectors.
Slave Units capable of 2-point bit-level distribution.
The I/O power supply is supplied fromm the communications,
power in the previously connected flat cable, and has a,
short-circuit detection function for protection CP1E-E60SDR-A Manual.
Industry-standard e-CON connectors.
Short-circuit protection safeguards the network,
from I/O short circuits CP1E-E60SDR-A Manual.
Simple communications connections,
with flat cable and connectors.
Bit-level distribution to support,
essentially any application.