OMRON C200HW-SLK13 Manual C200HW-SLK13 PROGRAMMING MANUAL

Used for data input and process value display for the C200H-TC---, C200H-TV---, C200H-CP114, and C200H-PID0-.Name: PID Control Module.
Model: C200H-PID02.
Output: Voltage output.Name: e-CON Connectors.
Specifications: Inputs/Outputs;
8 inputs /8 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection C200HW-SLK13 PROGRAMMING MANUAL.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet C200HW-SLK13
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error C200HW-SLK13 PROGRAMMING MANUAL. Specification: Platinum resistance thermometer input (Pt, JPt),
ON/OFF or advanced PID control,
tran-sistor (PNP) output, 2 loops.Description : Connects peripheral port to D-sub 9pin connector.
Must be used with CS1W-CN114 (3.3m).Programmed using the Fuzzy Support Software C200HW-SLK13 PROGRAMMING MANUAL. Up to 8 inputs and 4 outputs.Model: CPM2C-32CDTC-D. CPU Unit: Units with 32 I/O points.
2 Fujitsu connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.
Internal clock: --.Output method: Transistor sourcing.
Inputs: ---.
Outputs: 8.NO. OF I/O SLOTS: 8 SLOTSC500-OC I/O Unit Transistor Output 32 pts C500-OC224-E(3G2A5-OC224-E).
AC250/DC24V 2A.Product name: CJ-series I/O Control Unit.
Specifications: One I/O Interface Unit is,
required on each Expansion Rack.
Connecting Cable: CS1WW-CN@@3 Expansion,
Connecting Cable Mount to the right of,
the Power Supply Unit C200HW-SLK13 Manual.
Current consumption: 5V , 0.02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controlller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable C200HW-SLK13 Manual.