OMRON C200H-IDS21 Manual C200H-IDS21 PROGRAMMING MANUAL

Model: C200H-ID215.
No. of inputs: 32 pts.
Specifications: 24VDC.Model: CPM2C-16ET1M. Units with transistor outputs only.
1 MIL connector.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC.
Max Switching Current: 2 Amps C200H-IDS21 PROGRAMMING MANUAL.
Common Type: Independent.Model: C200H-OC222N.
No. of points: 12 pts C200H-IDS21
Specifications: 2A, 250VAC/24VDC(For resistive loads).Name: Clamp Terminal Blocks.
Specifications: Inputs; 16 inputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system C200H-IDS21 PROGRAMMING MANUAL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Connecting I/O control module and interface module.
Cable length: 0.7 m.Unit type: CS1 Special I/O Units C200H-IDS21 PROGRAMMING MANUAL.
Product name: Isolated-type DC Input Unit.
Input points : 8 inputs.
Signal range: 4 to 20 mA, 0 to 10 V,
0 to 5 V, 1 to 5 V.
Conversion speed (resolution):
250ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and spacce compared,
with previous systems C200H-IDS21 Manual.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems C200H-IDS21 Manual.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.