OMRON
Home >> Download >> OMRON >> Catalog Download >> OMRON DRT2-MD32BV datasheet PDF catalog DRT2-MD32BV PDF datasheet

OMRON DRT2-MD32BV datasheet PDF catalog DRT2-MD32BV PDF datasheet

Brand: OMRON
Product model: DRT2-MD32BV
Name: Board Terminals with MIL Connector
Sort: PDF datasheet
File language: English
File size: 21.23MB
Ratings: 1 A at 30 VDC.
LED indicator: Without indicator.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement DRT2-MD32BV PDF datasheet.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) DRT2-MD32BV
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Type: 1-Conduit.
Contact configuration: Slow-action; 1NC/1NO.
Conduit opening/Connector: M20.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch DRT2-MD32BV PDF datasheet.
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC.
M12-connector models are available, saving on,
labor and simplifying replacement.
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads DRT2-MD32BV PDF datasheet.
Variety of metallic heads available. Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF oil-resistant cable *1.
Actuator: Sealed crossroller plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cable lengths of 3 and 5 m available on standard models DRT2-MD32BV datasheet PDF catalog.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation DRT2-MD32BV datasheet PDF catalog.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-MD32SLH-1
OMRON Screw-less Clamp Terminals with Transistors DRT2-MD32SLH-1
Short/disconnection detection: Supported. Sp
OMRON
Transistor Remote I/O Terminals
DRT2-OD16
OMRON Transistor Remote I/O Terminals DRT2-OD16
Specifications: Outputs NPN - common 16 p
OMRON
Remote I/O Terminal with Relay Outputs
DRT2-ROS16
OMRON Remote I/O Terminal with Relay Outputs DRT2-ROS16
Specifications: Relay output 16 points. I/O