OMRON CP1L-M30DT1-D datasheet PDF catalog CP1L-M30DT1-D PDF datasheet

Unit classification: CJ1 Special I/O Units.
Product name: ProcessInput Units,
(Isolated-type Thermocouple Input Units).
Input points: 2 inputs.
Signal range selection:
Set separately for each input.
Signal range: Thermocouple:
B, E, J, K, L, N, R, S, T, U,
WRe5-26, PLII DC voltage: ±100 mV CP1L-M30DT1-D PDF datasheet.
Conversion speed (resolution): Conversion,
speed: 10 ms/2 inputs, Resolution: 1/64,000 CP1L-M30DT1-D
Accuracy at ambient temperature of 25°C:
Standard accuracy: ±0.05% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 24V, 0.06A.
Standards: UC1, CE.
A Single Unit Handling All Types of Inputs,
such as Temperature Sensor Inputs and,
Analog Signal Inputs (e CP1L-M30DT1-D PDF datasheet. g., 4 to 20 mA or 1 to 5V).
A Unit supports four input channels,
each of which can be set to a
platinum resistance thermometer, thermocouple,
and DC signal (current, voltage).
All inputs are isolated. C500-CT/3G2A5-CT Special I/O Unit High-speed Counter 50 kcps 1 pts C500-CT001(3G2A5-CT001).Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: One Unit only CP1L-M30DT1-D PDF datasheet. The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.For 5-slot Backplane.One Ethernet Option Board can be mounted in either option board slot 1 or 2.
Note: Cannot be used for the CP1L-L10.Model: C200HW-BI081-V1.
No. of I/O slots: 8 slots.Model : CV2000-CPU01-V1.
SFC / Ladder 2, 048 (with RAM62K words, the top internal link).High-speed Counter Unit
A High-speed Counter Unit counts input signals from incremental rotary encoders or other sources.

Name: High-speed Counter Module.
Model: C200H-CT002.
Number of axes: 1 axis/Unit.
Operating modes: 6.I/O Cable (for Rack I/O to Backplane) 0.6 m (L) CV500-CN613Model: CPM2A-30CDT-D. Power supply: DC power supply.
Output type: Transistor sinking.
Inputs points: 18 points.
Outputs points: 12 points.Unit type: CS1 Special I/O Units.
Product name: Isolated-type DC Input Unit.
Input points : 8 inputs.
Signal range: 4 to 20 mA, 0 to 10 V,
0 to 5 V, 1 to 5 V.
Conversion speed (resolution):
250ms/8 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.18A; 26V, 0.06A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space compared,
witth previous systems CP1L-M30DT1-D datasheet PDF catalog.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CP1L-M30DT1-D datasheet PDF catalog.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.