OMRON ZX-TDA11 Manual ZX-TDA11 Operation Manual

Optical fiber division.
Fiber length: 1 meters.
Allowable bending radius: 30mm above. Accessory: Replacement filter (6-pack).
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues ZX-TDA11 Operation Manual. Type: Side-view lens.
Spot: Spot dia.: 4 mm.
Cost Revolution Led by UV Curing ZX-TDA11
System.
Minimal heat damage thanks to UV-LED irradiation.
New UV LEDs with much higher brightness mounted in heads.
Greater irradiation power to reduce bonding tact time.
Usage of LEDs that have a long lifetime of 40,000,
hours* drastically reduces running costs.
Ultra compact body that is approximately 1/8th the size,
of a conventional lamp system ZX-TDA11 Operation Manual.
Equipped with a color LCD that makes settings simple and reliable. Cable length: 8 m.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Unit: CPU Units.
Name: LED type without display (See note 1.).
No. of I/O points: 20.
LCD display: NO.
Power supply voltage: 12 to 24 VDC ZX-TDA11 Operation Manual.
Inputs: 12, 12 to 24 VDC.
Outputs: 8, Relays.
Buttons, calendar, and clock: NO.
Analog input: Yes.
Even Broader Applications with Increased.
Functionality and Higher Precision.
Increased functionality in a compact body (70 mm wide × 90 mm high).
Easy programming is available using the LCD and operation,
buttons. (See note 1.).
This single Unit easily provides relay, timer, counter, and time,
switch functions.
Expansion is easy with Expansion I/O Units, allowing up to 44,
I/O points. (See note 2.).
Economy-type and Communications-type CPU Units have been,
added to series.
Improved Weekly Timers (See note 1.).
Increased timing accuracy with a monthly deviation of ±15 s,
max. Multiple-day operation and pulse output operation have,
been added.
Select from two power supply options:
100 to 240 VAC or 12 to 24 VDC. Measurable at any position.
The usual limitations, such as the ''measurement,
area being coonfined to the center''
or ''large errors due to positioning'',
that used to plague laser measuring sensors,
have now been overcome ZX-TDA11 Manual. Measurements can be,
consistently taken within a 500 mm area,
whatever stage the work is at orr whichever way it is inserted ZX-TDA11 Manual.
It can now be set to positions without interference from,
the work feed and without limitations of size of work area.