OMRON G3J-205BL-2 Manual G3J-205BL-2 INSTRUCTION MANUAL

Terminal (Wire connection): Push-In Plus Terminal.
Classification: Standard.
Latching lever (Test switch): No.
Rated input voltage: AC, 110V.
Global standard size, low profile slim.
I/O relay with width 6.2 mm.
Realized about 25% lower profile than conventional.
products, contributing to further miniaturization of the control panel G3J-205BL-2 INSTRUCTION MANUAL.
Realized opening and closing ability with one pole 6 A slim shape G3J-205BL-2
Micro load products for one pole 50 mA using Au-plated.
contacts for small load switching also available.
Since G2RV is a transparent case, confirming the state of,
the contact with the naked eye is possible, and easy to,
confirm abnormality on-site (installed location).
Screw terminal is also stocked to meet the screw type needs G3J-205BL-2 INSTRUCTION MANUAL.
Mounted relay uses plug-in terminals that are difficult to,
bend when exchanging. Control terminal block: Terminal block with small slotted screws.
Type: Standard.
Capacity: 60 A, 100 to 240 VAC.
Heater burnout detection: No.
Communications: No.
High-precision Control with Easy Setup,
Precise heater burnout detection.
Set value and present value monitoring with indicators G3J-205BL-2 INSTRUCTION MANUAL.
Phase control or optimum cycle control.
RS-485 communications to set manipulated variables and,
monitor load current.
Total run time monitoring.
Output modes for phase control: proportional to phase angle,
proportional to voltage, proportional to square voltage,
and constant-current control.
Application with various loads: constant load resistance,
variable load resistance.
UL, and IEC/EN (TÜV) certified. Type: input module.
Insulation: photo coupler.
Action indicator: there.
Logic supply voltage: DC4 ~ 32V.
Logic supply current: 25mA.
Input rated voltage: DC5 ~ 24V.
I/O solid state relay can bee used for OMRON I/O type G7TC relay terminal G3J-205BL-2 Manual.
Input and output composite input module, the output module is complete.
Can be used for I/O type P7TF terminal. Can also be mixed with the I/O type G7T relay.
Can check the workinng status of SSR through the action indicator G3J-205BL-2 Manual.
Have access to UL, CSA standard certification of the series of products have also been series (-US type)