OMRON E5EN-HSS2HBD Manual E5EN-HSS2HBD INSTRUCTION Manual

E32-TC200A type: standard type; standard,
Specialty: M3 screws (small),
Shape / detection distance (mm): 900; 680; 450 (180),
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: 1 (0.006),
Fiber element for meeting diversified needsName: Reflectors.
Directional angle: 30° min E5EN-HSS2HBD INSTRUCTION Manual.
Ambient operating temperature range: -25 to 55°C.
Ambient storage temperature range: -40 to 70°C E5EN-HSS2HBD
Ambient operating humidity range: 35% to 85%.
Ambient storage humidity range: 35% to 95%.
Degree of protection: IEC IP67.
Accessories: --. Sensing method: Through-beam (Emitter + Receiver).
Connection method: Pre-wired (2 m).
Sensing distance: 500 mm.
Operation mode: Dark-ON.
Model: NPN output E5EN-HSS2HBD INSTRUCTION Manual.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Appearance: Shielded, M12.
Sensing distance: 2 mm.
Output configuration: DC 2-Wire Models.
Model: Operation mode, NC.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected E5EN-HSS2HBD INSTRUCTION Manual.
Pre-wired Smartclick Connector Models also available. Sensing method: Retro-reflective.
Appearance: Vertical.
Connection method: Pre-wired Connector (M12).
Sensing distance: 3m.
Water- and Oil-resistant.
Photoelectric Sensor with.
Metal Housing Used for Long.
range Sensing.
Excellent resistance against the water and oil.
Easy application in locations with oil mist.
Long-range sensing up to 30 m with Through-beam models.
Shock resistance rated at 1,000m/s2.
Product lineup includes metal M12 pre-wired connector models.
NPN/PNP selector switch output. Size: 48 x 96mm.
Category: power AC100 ~ 240V with.
Shell color: black.
Control output 1: output unit mode.
Control output 2: output unit mode.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater break, SSR fault detection function: single phase or three phase heater detection function.
Event entry point: 2.
Transfer output: transfer output (special terminal).
Remote SP:4 to 20mA input.
Communication: RS-485.
New program type.
A new type of liquid crystal with high performance cost ratio is adopted in the 256 paragraph,
Visual angle, contrast can be improved.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
High resolution 5 bit display / can display 0.01 degrees C.
High speed sampling period 60ms.
All models complete a variety of (to the thermocouple /Pt/ analog input switching), 1 machines to support a variety of sensors.
Also supports remote SP.
Add PV/SV state display function, to see the state of the thermostat
(automatic / manual, RUN/RESET, alarm), interactive display PV/SV.
Through the support software (Ver.4.3 CX-Thermo) maakes the process of setting management becomes very
Simple use of simple computing functions (AND/OR logic and delay) to set the implementation of flexible contact output E5EN-HSS2HBD Manual.
Through the infrared port can be carried out from the frront of the communication E5EN-HSS2HBD Manual.
The control output ON/OFF times counting function can predict the fault of the internal relay of the temperature controller.