OMRON E5EC-TCX4DSM-065 Manual E5EC-TCX4DSM-065 INSTRUCTION Manual

E32-D11 type: standard type; resistance to twists and turns,
Specialty: M6 screw,
Bending radius (mm): B; R4.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsSmall, easy to use.
Detection mode: on the radio.
Shape: horizontal type.
Connection mode: lead wire E5EC-TCX4DSM-065 INSTRUCTION Manual.
Detection distance: 2 meters of red light.
Output mode: PNP output E5EC-TCX4DSM-065 Item: Mark-detecting models (multiple color light sources); Green LED.
Functions: Timer, Response speed change.
Model: NPN output.
Advanced Fiber Amplifier Units.
Features a Power Tuning function that optimizes light,
reception at the press of a button.
APC circuits to suppress LED aging degradation used with,
4-element LEDs E5EC-TCX4DSM-065 INSTRUCTION Manual.
2-channel models achieve the thinnest* profile in the industry,
at only 5 mm per channel.
2-channel models also offer AND/OR control output.
The E3X-MDA0 with two channels supports an EtherCAT Sensor.
Communications Unit or CompoNet Sensor Communications Unit. Ordering Information.
Built-in Amplifier Photoelectric Sensors. Type: Shielded.
Appearance: Screw, M10 × 22 mm E5EC-TCX4DSM-065 INSTRUCTION Manual.
Sensing distance: 2 mm.
Repeat accuracy: 2 μm.
Cable specification: Standard .
Proximity Sensor with Separate.
Amplifier Enables Easily Making High.
precision Sensitivity Settings.
Wide variety of Sensor Heads to select according to the,
application. Flexible cables are used between Preamplifiers,
and Amplifier Units of the Sensor Heads.
High resistance to changes in ambient temperature.
Temperature characteristics of 0.08%/°C (for 5.4-dia. models).
Make simple and reliable detection settings with micron,
level precision using the teaching function.
Check the sensing excess gain level on the digital display.
Support for high-precision positioning and screening with,
fine positioning to maximize variations.
The E2C-EDA0 supports an EtherCAT Sensor,
Communications Unit or CompoNet Sensor,
Communications Unit. Size: 48 * 48mm, terminal type.
Category: control output 1 point type (power supply AC100 ~ 240V).
Shell color: black.
Control output: current output.
Control mode: standard or heating cooling.
Auxiliary output points: 2 points.
Heater break, SSR fault detection function: -.
Event input points: -.
Transfer output: output (using control output).
Communication: -.
New program type.
A new type of liquid crystal with high performance cost ratio is adopted in the 256 paragraph,
Visual angle, contrast can be improved.
Can be set up to 8 procedures (mode) x 32 (step) procedure.
High resolution 5 bit display / can display 0.01 degrees C (to achieve a small size of 48 x 48mm).
High speed sampling period 60ms.
Full of all models (capable of thermocouple /Pt/ analog input switching),
1 machines to support a variety of sensors.
Add PV/SV state display function, to see the state of the tthermostat
(automatic / manual, RUN/RESET, alarm),
Interactive display PV/SV E5EC-TCX4DSM-065 Manual.
By supporting software (Ver.4.3 CX-Thermo),
In simple arithmetic functions (AND/OR logic and delay).
Setting the program settings that can performm flexible contact output E5EC-TCX4DSM-065 Manual.
The control output ON/OFF times counting function can predict the fault of the internal relay of the temperature controller.