OMRON E5CC-QQ2ASM-007 Manual E5CC-QQ2ASM-007 INSTRUCTION Manual

Size: M12 (Brass); Double; Shielded (See note 2.).
Sensing distance: 4 mm.
Connecting method (See note 1.): M12 Connector.
Body length: Short.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. Size: M8(Stainless steel)(See note 2.); Single; Shielded.
Sensing distance: 1 E5CC-QQ2ASM-007 INSTRUCTION Manual. 5 mm.
Connecting method (See note 1.): M8 Connector (3-pin) E5CC-QQ2ASM-007
Body length: Long.
Output configuration: PNP.
Operation mode NC.
A new generation in global applications. Size: M30, Non-shielded.
Sensing distance: 30.0 mm
Connection: M12 connector.
Body material: Brass.
Thread length (overall length): 66 (80).
Output configuration: PNP.
Operation mode NO.
Safe Mounting with Greater E5CC-QQ2ASM-007 INSTRUCTION Manual.
Sensing Distance.
Ensures a sensing distance approximately 1.5 to 2,
times larger than that of any conventional OMRON Sensor.
Problems such as the collision of workpieces are eliminated.
Full range of standard sizes (M8, M12, M18 and,
M30; both long and short barrels).
Modular construction simplifies customization. Appearance: Close-mounting.
Sensing method: Through beam type (with slot) E5CC-QQ2ASM-007 INSTRUCTION Manual.
Connecting method: Connector model (4 poles).
Sensing distance: 5 mm (slot width).
Operating mode: Dark-ON/Light-ON (2 outputs).
Indicator mode: Incident light.
Model: NPN output.
Built-in connector enables,
downsizing and easier connection.
Protective circuit for safe operation.
A built-in connector minimizes the shape and dimensional,
requirements.
Two outputs: light-ON and dark-ON.
Complete lineup including seven different shapes.
Safer operation with built-in power supply reverse polarity,
protection.
Output overcurrent protection with a thermal shutdown,
circuit (patent pending).
The indicator can be seen from many directions to enable,
installation in more locations.
Connector with lock that mates with commercially available,
connectors. Setting: simulation settings.
Indication mode: no indication.
Adjustment mode: proportional action (P).
Output: relay. E5CC-QQ2ASM-007 Manual.
Input: thermocouple J.
The size of the DIN48 to achieve the simulation set, low cost.
The most small and realize the low cost of.
Proportional (P) action in the regulation mode.
And the reset function is added.
Through the installation of the adapter can be continuously close E5CC-QQ2ASM-007 Manual.
The installation of DIN guide rail and panel mounting can be carried out by means of insertion.