OMRON E5AR-TPRQE3MF-FLK Manual E5AR-TPRQE3MF-FLK INSTRUCTION Manual

The ultra small size, high performance and rich models.
5.5mm ultra small built-in amplifier.
Maximum detection distance 2.5mm. Workpiece shaking can also be stable detection.
Response frequency 1kHz.
Low consumption current.
Category: DC 2 wire type.
Shape: non shield.
Detection surface: below E5AR-TPRQE3MF-FLK INSTRUCTION Manual.
Detection range: 2.5mm.
Action mode: NO. Setting: simulation settings E5AR-TPRQE3MF-FLK
Indication mode: no indication.
Adjustment mode: proportional action (P).
Output: relay.
Input: platinum resistance Pt100.
The size of the DIN48 to achieve the simulation set, low cost.
The most small and realize the low cost of.
Proportional (P) action in the regulation mode.
And the reset function is added.
Through the installation of the adapter can be continuously close E5AR-TPRQE3MF-FLK INSTRUCTION Manual.
The installation of DIN guide rail and panel mounting can be carried out by means of insertion. Appearance: Shielded, M30.
Sensing distance: 10 mm.
Model: Operation mode, NO.
Proximity Sensor with a Long Screw Length.
Increased tightening strength. Cable protectors,
provided as a standard feature.
Increased indicator visibility.
A milled section for wrench grip on all models E5AR-TPRQE3MF-FLK INSTRUCTION Manual. Size: 48 x 96mm.
Control output 1: voltage output (SSR driver).
Control output 2: relay output.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: 1 points.
Communication: RS-485.
Event input: 6 points.
Remote SP input: there.
Transfer output: have.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SSP input, suitable for a wide range of applications E5AR-TPRQE3MF-FLK Manual.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperrature controller is connected to each other by using the component communication E5AR-TPRQE3MF-FLK Manual.
A new type of proportional control allows you to control the valve.