OMRON E3X-SD8 Manual E3X-SD8 INSTRUCTION sheet

Type: 3 wire, shielded.
Shape: 3.
Detection range: 0.6mm.
Connection mode: lead type (2m).
Wire specification: PVC (oil resistant).
Action mode NO.
PNP output.
Proximity sensors for preferred world top performance and quality.
Standard type of magnetic metal detection.
Rich variety.
According to the conditions to choose the most suitable models E3X-SD8 INSTRUCTION sheet.
Anti interference function of different frequency range models E3X-SD8
Has excellent environmental performance.
Standard wire material for oil resistant PVC.
Test face using cutting oil material.
Standard wire jacket. Size: 48 x 96mm.
Control output 1: relay output.
Control output 2:--.
Auxiliary output: 2 independent points.
Power supply voltage: AC100 ~ 240V E3X-SD8 INSTRUCTION sheet.
Terminal shape: screw terminal table type.
Input category: full range multi input.
Heating wire break, SSR fault detection function: -.
Communication: -.
Event input: 4 points.
Remote SP input: -.
Transfer output: -.
Large screen display white PV legible. From selection to setting and operation are simple and easy to use.
Full capacity, function and performance of I/O E3X-SD8 INSTRUCTION sheet. Suitable for more applications.
E5AC white LCDPV display height is about 25mm.
The upper panel and the front panel are equipped with tool ports.
With the communication conversion line (sold separately) connected to the computer to establish the controller without the need to install the wire for power supply.
Easy to install CX-Thermo (sold separately).
50ms high speed sampling period.
Model can be equipped with up to 4 point auxiliary output, 6 point event input,
1 point transfer output and remote SP input, suitable for a wide range of applications.
The main body is short, the thickness is only 60mm.
Easy to use programmable logic controller (PLC) is connected to the programmable logic controller (PLC).
The temperature controller is connected to each other by using the component communication.
A new type of proportional control allows you to control the valve. Size: 48 x 96mm.
Control output 1: relay output (open).
Control output 2: relay output (off).
Auxiliary output: 2.
Communication mode: -.
Heater disconnection: -.
Event input: -.
Plug in terminal.
Potentiometer input: -.
Power supply voltage: AC100 ~ 240V.
New highlight LCD panel, font larger, dissplay more clearly integrated low power design,
Longer life performance stability,
Perfect function of proportional valve control special (some models have no potentiometer input virtual opening function)
E5AC-PR-800 white LCDPV ddisplay height to reach 25mm, greatly improve the visibility E3X-SD8 Manual E3X-SD8 Manual.
The main body is short, and the diameter is only 60mm.
50ms high speed sampling period.