OMRON E3T-SL21-M1TJ Manual E3T-SL21-M1TJ INSTRUCTION sheet

E32-T16P type: special beam type; region detection,
Specialty: regional width 11mm,
Shape / detection distance (mm): 1500; 1100; 750 (300),
Bending radius (mm): R10.
Standard test object (minimum test object) (mm) 1: (0.2) 3,
Fiber element for meeting diversified needsPower supply voltage: AC/DC power supply selectable type E3T-SL21-M1TJ INSTRUCTION sheet.
Sensing method: Diffuse-reflective.
Sensing distance: 2 E3T-SL21-M1TJ5 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-reflective: 2 E3T-SL21-M1TJ INSTRUCTION sheet. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available. Size: 96 × 96 mm E3T-SL21-M1TJ INSTRUCTION sheet.
Control type: Position-proportional control(1 loop).
Control mode: Single-loop position-proportional control(See note.).
Outputs(control/transfer): Relay output(1 open, 1 close).
Optional functions: Auxiliary outputs (SUB), 4;
Event inputs, 4; Serial communications, No.
E5AR Digital Controllers offer high speed,
high precision, and multiple I/O and use a 5-digit,
3-row LCD display for high visual clarity.
A short sampling period of 50 ms enables use in applications,
requiring high-speed response.
PV, SP, and MV data is displayed simultaneously in a 3-row,
negative LCD display with a backlight.
Multiloop control, cascade control, and proportional control are,
possible with a single Controller.
When using modeels with CompoWay/F communications, initial,
settings can be downloaded and settings can be masked using,
Support Software (CX-Thermo version 4 E3T-SL21-M1TJ Manual. 0 or higher).
Equipped with calculation functions as a standard (e.g., square,

root calculation and broken-line approximation) E3T-SL21-M1TJ Manual.
DeviceNet Communications.
Data setting and monitoring can be performed without special programming.