OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-MD16S Manual DRT2-MD16S INSTRUCTION Manual

OMRON DRT2-MD16S Manual DRT2-MD16S INSTRUCTION Manual

Brand: OMRON
Product model: DRT2-MD16S
Name: remote i/o terminal
Sort: INSTRUCTION Manual
File language: English
File size: 0.36MB
Direction of Operation Key insertion: Vertical.
Cable length: 5 m.
2NC/1NO (Slow-action).
Slim Safety Door Switches with IP67 Rating.
Slim design with a width of only 17 mm.
(three-contact models).
Reversible design allowing either front or rear mounting.
Built-in Switches with two- or three-terminal contact DRT2-MD16S INSTRUCTION Manual.
construction are available.
Operation Key with rubber mounting hole to absorb vibration and shock DRT2-MD16S
IP67 degree of protection. Type: Welding / wire type, with left column.
Drive rod: rod type Shibai leaf.
Terminal specifications: with wire, under the lead.
Contact specifications: 1a.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment DRT2-MD16S INSTRUCTION Manual.
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free. Release key type: Trapped key *1.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 2NC/1NO+3NC DRT2-MD16S INSTRUCTION Manual.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits and two monitor contacts provide an,
array of monitoring patterns.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection. Type: Welding / wire type, M3 screw mounting.
Drive rod: rod type Shibai leaf.
Terminal specifications: with wire, the right side of the lead.
Contact specificattions: 1a DRT2-MD16S Manual.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used ffor easy long stroke specifications (OT reference value: 1 DRT2-MD16S Manual. 4mm).
Without harmful substances to the environment, the lead type has also been lead-free.
Related products
OMRON
Board Terminals with MIL Connector
DRT2-MD32B-1
OMRON Board Terminals with MIL Connector DRT2-MD32B-1
Specifications: I/O, PNP input: - common, ou
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-OD16SL
OMRON Screw-less Clamp Terminals with Transistors DRT2-OD16SL
Short/disconnection detection: Not supported.
OMRON
Board Terminals with MIL Connector
DRT2-OD32B-1
OMRON Board Terminals with MIL Connector DRT2-OD32B-1
Specifications: Outputs, PNP common, 32 o
OMRON
Board Terminals with MIL Connector
DRT2-ID32B-1
OMRON Board Terminals with MIL Connector DRT2-ID32B-1
Specifications: Inputs, PNP - common, 32 in