OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON DRT2-AD04H Manual DRT2-AD04H INSTRUCTION Manual

OMRON DRT2-AD04H Manual DRT2-AD04H INSTRUCTION Manual

Brand: OMRON
Product model: DRT2-AD04H
Name: temperature input terminal
Sort: INSTRUCTION Manual
File language: English
File size: 3.09MB
Release Key Type: Standard (metal).
Wiring method: Connector.
Solenoid voltage/Indicator: 24VDC (without indicator).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 4-contact Model,
Insert the built-in switch (A, B, C, D, S, T, U or V) into the blank @ DRT2-AD04H INSTRUCTION Manual.
Conduit size (See Note DRT2-AD04H): G1/2.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) DRT2-AD04H INSTRUCTION Manual.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames DRT2-AD04H INSTRUCTION Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors. Specifications: Inputs;
NPN (+ common);
16 points.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: 24 VDC.
Very Compact 16-/32-point Remote Terminals.
Used in combination with Interface,
Conversion Boards (e.g., D-Sub) to,
connect to a wide range of interfaces.
35 x 60 x 80 mm (W x D x H). Release key type: Trapped key *1.
Indicator: Orange.
Lock and release types: Mechanical lock Solenoid release.
Contact configuration(door open/closed detection switch,
and lock monitor switch contacts): 3NC+3NC.
Conduit opening: G1/2.
Holding Force of 3,000 N.
Two safety circuits andd two monitor contacts provide an,
array of monitoring patterns DRT2-AD04H Manual.
Standard gold-clad contacts enable use with ordinary loads,
and microloads.
Models with trapped keys prevent workers from being locked,
in hazardous work areas. DRT2-AD04H Manual.
Models with rear release buttons allow people to unlock the,
Switch and escape if they are locked into hazardous areas.
IP67 degree of protection.
Related products
OMRON
Board Terminals with MIL Connector
DRT2-ID32B
OMRON Board Terminals with MIL Connector DRT2-ID32B
Specifications: Inputs, NPN common, 32 inp
OMRON
Screw-less Clamp Terminals with Transistors
DRT2-OD32SLH
OMRON Screw-less Clamp Terminals with Transistors DRT2-OD32SLH
Short/disconnection detection: Supported. Sp