OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON D4NH-2AAS Manual D4NH-2AAS INSTRUCTION sheet

OMRON D4NH-2AAS Manual D4NH-2AAS INSTRUCTION sheet

Brand: OMRON
Product model: D4NH-2AAS
Name: safety-door hinge switch
Sort: INSTRUCTION sheet
File language: English
File size: 0.47MB
Actuator: Plunger.
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 1NC/1NO MBB(Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available D4NH-2AAS INSTRUCTION sheet. )
M12-connector models are also available, saving on labor and,
simplifying replacement D4NH-2AAS
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Ratings: 1 A at 125 VAC.
LED indicator: With indicator D4NH-2AAS INSTRUCTION sheet.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) D4NH-2AAS INSTRUCTION sheet.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Ratings: Standard load; 0.1 A at 125 VAC, 0.1 A at 30 VDC.
Cable: VCTF cable *2.
Actuator: Roller plunger.
Cable length : 5 m.
Compact Limit Switch That''s Also.
Thin and Highly Sealed.
Approved by EN, UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)
Sealing characteristics that meet IEC IP67 degree of protection.
Triple-sealed construction:
Plunger section sealed via nitrile rubber packing seal and,
diaphragm; switch section sealed via nitrile rubber cap;
cable entrance sealed via encapsulating material.
Cabble lengths of 3 and 5 m available on standard models D4NH-2AAS Manual.
Models also available with UL and CSA-certified cables.
Multiple mounting possible with Switches with Plungers.
Models with red LED indicators added to series for easy,
connfirmation of operation D4NH-2AAS Manual.
(Set by default to light for non-operation.)
VCTF oil-resistant cables with CE marking.
(Applicable only to standard models.)
Related products
OMRON
Safety-door Hinge Switch
D4NH-1DAS
OMRON Safety-door Hinge Switch D4NH-1DAS
Actuator: Shaft. Conduit size: 1-conduit Pg
OMRON
Safety-door Hinge Switch
D4NH-4FBC
OMRON Safety-door Hinge Switch D4NH-4FBC
Actuator: Arm lever. Conduit size: 1-conduit
OMRON
Safety-door Hinge Switch
D4NH-6BBC
OMRON Safety-door Hinge Switch D4NH-6BBC
Actuator: Arm lever. Conduit size: 2-conduit
OMRON
Safety-door Hinge Switch
D4NH-6BAS
OMRON Safety-door Hinge Switch D4NH-6BAS
Actuator: Shaft. Conduit size: 2-conduit G1