OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON D4N-1D31R Manual D4N-1D31R INSTRUCTION sheet

OMRON D4N-1D31R Manual D4N-1D31R INSTRUCTION sheet

Brand: OMRON
Product model: D4N-1D31R
Name: pull-reset safety limit switch
Sort: INSTRUCTION sheet
File language: English
File size: 0.54MB
Release Key Type: Special (resin).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Solenoid lock Mechanical release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 6-contact Model,
Insert the built-in switch (N, P, Q or R) into the blank @ D4N-1D31R INSTRUCTION sheet.
Conduit size (See Note.): 1/2-14NPT D4N-1D31R
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available) D4N-1D31R INSTRUCTION sheet.
Key holding force of 1,300 N.
It is possible to change the key insertion point.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lock Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames.
The plastic material makes the Slide Key suitable,
for lightweight doors D4N-1D31R INSTRUCTION sheet. Actuator: Plunger.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 2NC(Snap-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Ratings: 1 A at 30 VDC.
LED indicator: Without indicator.
Actuator: Sealed crossroller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting D4N-1D31R Manual.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(sstandard indicator is lit when Switch is not operating) D4N-1D31R Manual.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)
Related products
OMRON
Pull-reset Safety Limit Switch
D4N-1C20R
OMRON Pull-reset Safety Limit Switch D4N-1C20R
Actuator: Roller lever resin lever, resin ro
OMRON
Safety Limit Switch
D4N-6172
OMRON Safety Limit Switch D4N-6172
Actuator: One-way roller arm lever vertical
OMRON
Safety Limit Switch
D4N-4A2G
OMRON Safety Limit Switch D4N-4A2G
Actuator: Adjustale roller lever, form lock
OMRON
Safety Limit Switch
D4N-8C62
OMRON Safety Limit Switch D4N-8C62
Actuator: One-way roller arm lever horizonta