OMRON D4N-1131 Manual D4N-1131 INSTRUCTION sheet

Terminals: Straight.
Actuator: Pin plunger.
Door Switch Incorporated,
with Two Circuits for Power,
Loads and Micro Loads.
Compact size, with two separate circuits for power and signals.
Panel- or screw-mounted with ease. Actuator: Roller plunger.
Conduit size: 2-conduit; G1/2.
Built-in switch mechanism: 3NC (Slow-action) D4N-1131 INSTRUCTION sheet.
A Series of Pull-reset Models Now.
Available D4N-1131
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC.
M12-connector models are available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads D4N-1131 INSTRUCTION sheet.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Actuator: Roller lever (resin roller).
Conduit openings: M20.
2NC (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts D4N-1131 INSTRUCTION sheet.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Release key type: general type (metal).
Connection mode: connector.
The solenoid voltage / indicator type: DC24V/ orange.
Lock / release mode: mechanical lock / electromagnetic release.
Contact composition (door open and close detection switch + lock control switch):6 contacts (2NC/1NO + 2NC/1NO).
Conduit size: G1/2.
6 contact electromagnetic lock safety door switch world minimum level.
Small electromagnetic lock safety door switch D4SL-N.
A touch of the 2 wiring way, can reduce the working hours.
Built in a variety of types of switches, applicable to all types of devices (you can choose 4 contacts, 5 contacts, 6 contacts).
Lock strength for a reassuring 1300N.
The insertion direction of thee key can be changed without taking down the head D4N-1131 Manual.
Significantly reduce the solenoid current helps to reduce the cost of the power supply.
The sliding key unit of D4SL-NSK10-LK.
Using the lock key can prevent the locked in the daangerous area of the fence D4N-1131 Manual.
D4SL-N can be easily mounted on the side of 40mm aluminum frame.
Material for resin, the most suitable light weight door.