OMRON
Home >> Download >> OMRON >> Manual Download >> OMRON D4JL-3PFA-D7-01 Manual D4JL-3PFA-D7-01 INSTRUCTION sheet

OMRON D4JL-3PFA-D7-01 Manual D4JL-3PFA-D7-01 INSTRUCTION sheet

Brand: OMRON
Product model: D4JL-3PFA-D7-01
Name: guard lock safety-door switch
Sort: INSTRUCTION sheet
File language: English
File size: 0.54MB
Actuator: Shaft.
Conduit size: 2-conduit; M20.
Built-in switch mechanism: 2NC/1NO (Slow-action).
Compact, Plastic-body Safety-door.
Hinge Switch Designed for Saving.
Space in Machines and Other.
Equipment.
Lineup includes three contact models with 2NC/1NO and.
3NC contact forms in addition to the previous contact forms D4JL-3PFA-D7-01 INSTRUCTION sheet.
1NC/1NO, and 2NC. Models with MBB contacts are also available D4JL-3PFA-D7-01
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads. Classification: Analog input.
I/O points: 4 inputs (Resolution: 6, 000).
Performs Calculations on Analog Values within the Slave Itself.
Also Provides High Resolution at 1/30,000 (Full Scale) and,
Support for a Wide Variety of Data Sampling D4JL-3PFA-D7-01 INSTRUCTION sheet.
Equipped with the standard Smart Slave functions that provide powerful,
preventative maintenance and troubleshooting capabilities.
Sampling data can be analyzed internally to provide a low-cost scheduler function.
Equipped with functions such as the scaling function, peak/bottom hold;
top/valley hold; comparator function, cumulative counter, and derivative,
calculation function D4JL-3PFA-D7-01 INSTRUCTION sheet.
Two I/O points can be allocated to any two of the following values: analog,
input, peak/bottom, top, valley, or rate-of-change. Values without an,
allocated I/O point can be read with message communications. Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Sealed pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standarrd indicator is lit when Switch is not operating) D4JL-3PFA-D7-01 Manual.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Terminals: Right-angled.
Actuator: Hinge lever.
Door Switch Incorporated,
witth Two Circuits for Power,
Loads and Micro Loads D4JL-3PFA-D7-01 Manual.
Compact size, with two separate circuits for power and signals.
Panel- or screw-mounted with ease.
Related products
OMRON
Guard Lock Safety-door Switch/Slide key
D4JL-2PFA-D7-01
OMRON Guard Lock Safety-door Switch/Slide key D4JL-2PFA-D7-01
Release key type: Trapped key 1. Indicator:
OMRON
Guard Lock Safety-door Switch/Slide key
D4JL-4PFA-D7-01
OMRON Guard Lock Safety-door Switch/Slide key D4JL-4PFA-D7-01
Release key type: Trapped key 1. Indicator:
OMRON
Guard Lock Safety-door Switch/Slide key
D4JL-4NFA-D7-01
OMRON Guard Lock Safety-door Switch/Slide key D4JL-4NFA-D7-01
Release key type: Trapped key 1. Indicator:
OMRON
Guard Lock Safety-door Switch/Slide key
D4JL-2RFA-D7-01
OMRON Guard Lock Safety-door Switch/Slide key D4JL-2RFA-D7-01
Release key type: Trapped key 1. Indicator: