OMRON CS1G-CPU45-EV1 Manual CS1G-CPU45-EV1 INSTRUCTIONS REFERENCE MANUAL

Unit type: CJ1 CPU Bus Units.
Product Name: Serial Communications nits.
Specifications:Communications Interface,
2 RS-232C ports;
Communications functions,
The following functions can be,
selected for each port:
Protocol macro Host Link,
NT Links (1:N mode)Serial Gateway,
No-protocol Modbus-RTU Slave CS1G-CPU45-EV1 INSTRUCTIONS REFERENCE MANUAL.
No. of unit numbers allocated: 1.
Current consumption : 5V, 0 CS1G-CPU45-EV128A; 24V,--.
Standards: UC1, N, L, CE.
The Serial Communications Units That Enable,
High-speed Connections with External Devices.
Each Serial Communications Unit provides two,
serial communications ports: RS-232C and,
RS-422A/485, and the serial communications,
mode can be set separately for each port from,
Protocol Macro, Host Link, NT Link,
Serial Gateway, and No-protocol CS1G-CPU45-EV1 INSTRUCTIONS REFERENCE MANUAL. Name: Heat/Cool Temperature Control Module.
Model: C200H-TV003.
Sensor: Thermocouple: R, S, K, J, T, E, B, N, L, U.
Control output: Current output(transistor output used for cooling outputs).C500-DA/3G2A5-DA Special I/O Unit Analog Output C500-DA003(3G2A5-DA003).
Output: 2 pts.
Specification: 0~+5V.Model: CPM2A-20CDR-D. Power supply: DC power supply CS1G-CPU45-EV1 INSTRUCTIONS REFERENCE MANUAL.
Output type: Relay.
Inputs points: 12 points.
Outputs points: 8 points.Product name: N@@S1- type CPU Units with 30 I/O Points.
Specifications: Power Supply, DC24V; Inputs, 18; Outputs, 12;
Output type: Transistor (sourcing).
Program capacity: 8K steps.
memory Data capacity: 8K words.
External powersupply(24 VDC): --.
Current consumption: 5 V, 0.27A; 24 V，0.02A.
Standards: CE.
The CP1E Programmable Controller: Economical, Easy to use, and Efficient.
The E@@(S)-type Basic CPU Units provide cost,
performance and easy application with only basic functionality.
The N@@(S@) and NA-types Application CPU Units,
support Programmable Terminal connection, position control,
and inverter connection. Product name: CJ-series I/O Control Unit.
Specifications: One I/O Interface Unit is,
required on each Expansion Rack.
Connecting Cable: CS1W-CCN@@3 Expansion,
Connecting Cable Mount to the right of,
the Power Supply Unit CS1G-CPU45-EV1 Manual.
Current consumption: 5V , 0.02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controlller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion Rack,
and connect the two Units with I/O Expansion Cable CS1G-CPU45-EV1 Manual.