OMRON CJ1G-CPU42P Communications Commands Manual CJ1G-CPU42P REFERENCE MANUAL

C500-AS Special I/O Unit ASCII BASIC UNIT C500-ASC01.Name: e-CON Connectors.
Specifications: Inputs; 32 inputs; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced CJ1G-CPU42P REFERENCE MANUAL.
Bit-level I/O distribution reduces,
wiring in the system CJ1G-CPU42P
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit classification: CJ1 CPU Bus Unit CJ1G-CPU42P REFERENCE MANUAL.
Product name: SPU Unit,
(High-speed Data Storage Unit).
Specifications:PC Card slot,
CF Card Type I/II × 1 slot,
Use an OMRON HMCEF@@@Memory Card;
Ethernet (LAN) port,
1 port(10/100Base-TX).
No. of unit numbers allocated: 1.
Current consumption: 5V , 0.56A;
24V, --.
Standards: UC1, CE.
High-speed Collection of System Data,
The CPU Unit can collect large amounts,
of process data, operation data,
inspection data, and other controlled,
system data quickly and automatically,
save the data in external storage,
media as CSV files CJ1G-CPU42P REFERENCE MANUAL. Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface: Pulse-train open-collector,
output with Pulse Counter Function;
Number of control axes : 2 axes.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.27A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speedd CJ1G-CPU42P Communications Commands Manual.
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors CJ1G-CPU42P Communications Commands Manual.